Vervolgstudie inventarisatie en historische analyse van slikken en schorren langs de Zeeschelde. Kalibratie en validatie van het hydrodynamisch 2 dimensionaal numeriek model: pilootstudie Notelaer en Ballooi
Maximova, T.; Plancke, Y.; Vanlede, J.; Mostaert, F. (2010). Vervolgstudie inventarisatie en historische analyse van slikken en schorren langs de Zeeschelde. Kalibratie en validatie van het hydrodynamisch 2 dimensionaal numeriek model: pilootstudie Notelaer en Ballooi. Versie 2.0. WL Rapporten, 713_21. Flanders Hydraulics Research: Antwerpen. XI, 33 + 1 p. bijl., 15 p. tab., 102 p. fig. pp.
Deel van: WL Rapporten. Waterbouwkundig Laboratorium: Antwerpen, meer
The shallow waters, intertidal mudflats and marshes along the Sea Scheldt have an important ecological value. They form a habitat for the development of ecosystems. A good understanding of the impact of human interventions on the estuarine ecosystem is required to manage the river in a sustainable way.
A calibration of the NEVLA model of the Scheldt estuary – including all tributaries which are tidally influenced – was executed in (Maximova et al., 2009). The water movement on the intertidal areas was not analyzed during the calibration because it is has a limited effect on the general water movement in the estuary. However, a good reproduction of the velocity in the littoral zone is necessary to answer ecological questions. The intertidal areas Notelaer and Ballooi were chosen as a pilot study in the framework of the project “Vervolgstudie inventarisatie en historische analyse van slikken en schorren in de Zeeschelde”. These areas are located between Rupelmonde and Temse. Both zones are ecologically valuable areas of the Upper Sea Scheldt.
Since the grid resolution of the calibrated NEVLA model is too rough to represent the water movement in the intertidal areas correctly, it was necessary to refine the model grid. Delft3D model with the domain decomposition was used for the analysis. The input files from the calibrated NEVLA model were adapted for the use in the Delft 3D software.
This report describes the sensitivity analysis, model calibration and validation. The calibration and validation were based on comparison with ADCP and GPS float measurements of 10 and 11 June 2009.
Alle informatie in het Integrated Marine Information System (IMIS) valt onder het VLIZ Privacy beleid